For a raised installation of the Modpool, we suggest consulting an engineer.
Note: the bottom designs of Modpools vary depending on the containers we use. Corners will always be level with each other, but the skirts of each container can be raised at different heights. We recommend waiting until the Modpool arrives to make your own measurements, and build the support heights accordingly.
However, we can offer recommendations on the number of supports and their placements:
20' x 8' Modpool
- 3 I-beams running the the length of the Modpool
- 1 I-beam along each long-side
- 1 I-beam running length-wise down center
- Consult with your engineer how to support the I-beams
- Ensure your specify to the salesperson you need the Steel Reinforcing Bars for the elevated install
40' x 8' Modpool
- 3 I-beams running the the length of the Modpool
- 1 I-beam along each long-side
- 1 I-beam running length-wise down the center
- Consult with your engineer how to support the I-beams
- 40' Modpools have the Steel Reinforcing Bars included for I-beam support