Hardware Overview:
Step 1:
Connect the ScreenLogic Interface to your House's Wireless Router with an Ethernet cable.
The ScreenLogic Interface device can be mounted on a wall within Wi-Fi distance to your Modpool.
Step 2:
Connect the ScreenLogic Interface to the House-side Antenna with the white cable that has green connector points.
Make sure you plug in the antenna to a power source.
At this point, the antennas should be communicating if you have your Modpool powered.
Step 3:
Download the ScreenLogic Connect app from either the Apple App Store
or Google Play
Step 4:
Start the app.
It should automatically connect you to your Modpool if the hardware has been correctly set up.
Begin customizing your Modpool experience!
Note: No need to touch the Modpool-side antenna. It will be found connected to the Modpool's control panel. It will have cable taped around it, as seen in the picture.